2.4GHz/5GHz Outdoor AP 600mW EOC-5611P (EnGenius)
Producto Nº : | EOC-5611P |
Precio de lista: | |
Precio excl. impuesto: | $139.99 |
Precio (impuestos incluidos).: | $149.79 |
Te ahorras: | $20.21 (11%) |
Disponibilidad: | 1 semana |
Product Overview
EOC5611P is a long range outdoor wireless Access Point / Client Bridge that operates in both 5GHz and 2.4GHz frequency. It provides high bandwidth up to 54Mbps and features dual polarization antenna with high transmitted output power as well as superior sensitivity. EOC5611P extends radio coverage, avoids unnecessary roaming between Access Points and ensures a stable wireless connection while reduces the number of required equipments.
EOC5611P provides user friendly interface including user friendly distance control ranges from 1KM up to 30KM and RSSI LED indicator offering real time signal status. It comes with PoE injector for convenient outdoor installation.
Specifications
Wireless | 5GHz / 2.4GHz It works in 5GHz / 2.4GHz frequency spectrum High output power Transmit output power programmable for different country selections High Data Rate High speed transmitting rate up to 54Mbps, supports large payload such as video streaming Multifunction application Access Point/Client Bridge/Client Router/WDS AP/WDS CB Long range transmitting Transmit power control and distance control (ACK timeout) Signal Strength Display LED indicators have the best transmit and receive signal for traffic communication. And RF signal strength status shown LEDs of 3 colors, making network build-up easier Narrow Bandwidth Provide 5MHz/10MHz/20MHz bandwidth selection. Multiple SSID 4 SSID supported. Each SSID can set itself wireless or WAN access setting. QoS(WMM) Enhance performance and density |
||||||||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
Networking | PPPoE Point-to-Point Protocol over Ethernet at Client Router mode. This function will keep trying when failed or disconnected PPTP Point-to-Point Tunneling Protocol (PPTP) is a method for implementing virtual private networks VPN Pass Through |
||||||||||||||
Security | 802.11i WEP, WPA, WPA2 (Encryption support TKIP/AES) MAC address functions MAC address filter (AP mode) 802.1x IEEE802.1x Authenticator Station isolation L2 Isolation |
||||||||||||||
Management | Firmware Upgrade Upgrading firmware via web browser, setting are reserved after upgrade Reset & Backup Reset to factory default. User can export all setting into a file via WEB MIB MIB I, MIB II(RFC1213), Private MIB SNMP V1, V2c |
||||||||||||||
Hardware Specifications | |||||||||||||||
MCU/RF | Atheros AR2313+AR5112 | ||||||||||||||
Memory | 32MB SDRAM | ||||||||||||||
Flash | 8MB | ||||||||||||||
Physical Interface | 1 x 10/100 Fast Ethernet RJ‐45 1 x Reset Button 1 x Antenna Switch ( Internal and External Switch ) 2 x Reverse SMA Connector ( One is for 2.4GHz and another is for 5GHz ) |
||||||||||||||
LED indicators | Power/ Status LAN (10/100Mbps) WLAN (Wireless is up) 3 x Link Quality (Client Bridge mode) • Green: Good Quality • Yellow: Marginally Acceptable Quality • Red: Bad Quality |
||||||||||||||
Power Requirements | Active Ethernet (Power over Ethernet) Proprietary PoE design Power Adapter 24V / 1A DC |
||||||||||||||
Regulation Certifications | FCC Part 15C/15B/15E, EN301 893, EN 300 328, EN 301 489-1/-17, EN60950, IC Certification |
||||||||||||||
RF Specifications | |||||||||||||||
Frequency Band | 802.11a = 5.150~5.350GHz, 5.470~5.725GHz, 5.725~5.825GHz 802.11b/g = 2.412~2.472GHz |
||||||||||||||
Modulation Technology | OFDM = BPSK, QPSK, 16‐QAM, 64‐QAM DSSS = DBPSK, DQPSK, CCK |
||||||||||||||
Operating Channels | 802.11a = See the Table1 802.11b/g = 11 for North America, 14 for Japan, 13 for Europe |
||||||||||||||
Receive Sensitivity (Typical) | 802.11a ‐92dBm @ 6Mbps, ‐73dBm @ 54Mbps |
802.11g ‐92 dBm @ 6Mbps, ‐75 dBm @ 54Mbp |
802.11b ‐97 dBm @ 1Mbps ‐91 dBm @ 11Mbps |
||||||||||||
Maximum transmit power Please note that the transmit power is limited to 16dBm when set to country code UK Band B operation and to 22dBm when set to UK Band C. |
|
||||||||||||||
Estimated Transmission Distance using built-in 14dBi antenna Distances and throughputs are estimations based upon 'ideal' conditions with clear line of site at UK legal EIRP levels. Actual throughput may also be limited by LAN performance. |
|
||||||||||||||
Internal Antenna |
|
EOC5611P enforces transmission security with full support of latest encryption mechanism including 64/128-bit WEP, WPA and WPA2. With 14dBi internal antenna and superior performance, EOC5611P makes an optimal wireless solution for both small and large scale projects.
Resources
Firmware
- EOC5611P-engenius-1.2.4.1.zip (0 )
- EOC5611P v1.3.1.rar (3,7 MB)
- EOC5611P-engenius-1.3.3.rar (3,8 MB)
- Locator_for_Atheros_device.rar (211,6 kB)
Manuals
- Data Sheet: EOC5611P- Data Sheet.pdf (244,5 kB)
- Quick Guide: EOC5611P_QIG.pdf (133,5 kB)
- User Manual: EOC5611P_UserManualv2.0.pdf (1,6 MB)